Starline Pacific Inc - Starline Pacific Inc.

Since 1978 Starline Pacific Inc. has been providing technical support for every product we sell. If you need help with any products you have purchased from Starline Pacific scroll down this page to find the product you are having trouble with. If you still can't resolve the problem please don't hesitate to call our Technical Support Dept.
1-800-665-3994

HOT SPLIT TRANSFER PRINTING INSTRUCTIONS
Press Times
PAPER INSTRUCTIONS
InkJet Printers -- JetWear Dark -- -- EZ-Jet -- -- JetWear Cold Peel --	Colour Laser Copiers -- TransferWear Brilliant -- -- TransferWear Premium CLC -- -- TransferWear Dark --
Colour Laser Printers -- TransferWear CLP --	Alps & Printiva Printers -- Ultra-Soft --
FLEX AND FLOCK INSTRUCTIONS
Cut & Press Times

SUBLIMATION PRINTING INSTRUCTIONS
click here for printer friendly version

Our Sublimation Paper is for use with Epson printers using sublimation ink.

Transfer Instuctions

	1.	Print on the bright white side.
	2.	Secure the sublimation paper to imprintable substrate with the printed side against the substrate.
	3.	Place item in heat press, see chart below for print times and pressure settings.
	4.	After pressing immediately remove the transfer paper from substrate and allow to cool.

Substrate

Time (seconds)

Temperature (Fahrenheit)

Pressure

Comments

Polyester Fabric

400

Med - High

Pre-pressing the t-shirt for 2 - 5seconds will remove excess moisture and help for a better image transfer.

Soft L'ink T-shirts

400

Med - High

Pre-pressing the t-shirt for 2 - 5seconds will remove excess moisture and help for a better image transfer.

Mousepads

400

Med - High

Pressing mousepads beyond the recommended press time may damage the mousepad.

Unisub - Plastic

400

Med - High

Some plastic items may have a protective plastic film covering. This must be removed before printing!

Unisub - Hardwood

400

Med - High

Some hardwood items may have a protective plastic film covering. This must be removed before printing!

Ceramic Tiles

440

400

Low - Med

Print face down using rubber matt as the base.

Ceramic Mugs

200-300

380

Med - High

When print time has expired, remove the transfer paper and dip into room temperature water to cool.

Glass

180

380

Med - High

Do not place in cold water after printing this could result in cracking.

Metal

50-60

400

Med - High

Colors will be crisper is a sheet of paper towel is placed between the transfer paper and the heat platen. If you use a rubber mat to distribute heat more evenly then place the paper towel between the transfer paper and the rubber mat.

Stainless Steel Mug

180

380

Low - Med

Be careful not to add too much pressure! The Stainless Steel Mugs might crush from too much pressure.

Shoulder Bags

375

Med - High

Press the flap by itself first before you press the image. In other words, you want to *iron* out the wrinkles first so you have a smooth surface to work with.

Your Cart

Items: 0

Check-out

Signup

Stretch your imagination!

Super-Soft
Transfer Paper

Try our new Super-Soft transfer paper and experience our new Stretch Technology

Quick Pics

Quick Profits with Quick Pics!

Create hilarious custom gifts and customize your profits with Quick Pics!