EZ-Jet™ For Inkjet Transfers
This paper is designed to be used for commercial heat presses only.
1.	Printing Your Transfer
	(a)	Insert a single sheet of transfer paper into the printer with the printable surface loaded correctly for your printer.
	(b)	After you have adjusted the settings, print your design.
2.	Transferring the Image
	(a)	Cut away blank, unprinted areas of the printed transfer.
	(b)	Place garment, mouse pad or fabric imprintable onto heat press.
	(c)	Place transfer (print side down) onto the imprintable.
	(d)	Press at 375 degrees Fahrenheit (190 degrees Celsius) for 25-30 seconds with medium to high pressure.
	(e)	Peel hot for a matte look or peel cold for a slightly glossier look.
3.	Washing Instructions
	(a)	Machine wash cold only.
	(b)	Turn garment inside out.
	(c)	Do not use bleach.
	(d)	Remove promptly from washer and place in dryer. Colors may bleed if garment is wet too long. If bleeding occurs rewash immediately.
	(e)	Dry in dryer on low setting.